产品中心

Product

您当前的位置:首页 > 产品中心 > 自动剪线曲腕机

自动剪线曲腕机


型号:PFT-9588

  • 产品介绍
  • 产品视频
  • 说明书下载
  • 电子样本

PFT-9588

自动剪线曲腕机

Automatic trimmer thread feed-off-the-arm chain stitch machine

1.关键运动零件进行表面GIC高硬度自润镀层处理,减小机器零件磨损,延长机器使用寿命。

2.配置钢结构台板,钢结构台板自带下滚轮,局部移动方便,机器整体运行平稳,噪音低,振动小。

3.机器配置气动抬压脚、气动抬拖轮、机针冷却、自吸入式自动剪线装置。

4.结构特点:a是内置式拖轮驱动机构,相辅于机器转速的同步提高;b是气动斜置式加宽拖轮,便于拖轮上下抬压动作稳定,出线变顺畅。

5.履带式拖轮,厚薄料通用,适用性更强。

6.机器润滑方式,底坐机臂为贮油飞润滑,机头为上主轴油泵自动加油。


1.Key parts are with high hardness coating process,extending the machine life by decreasing the abrasion among the components,and increasing the lubrication among them.

2.Steel structure stand and table with wheels,convenient to move the machine,steady performance,low noise and low vibration.

3.The machine is configured with pneumatic presser lift,puller lift,needle cooler,auto suction thread trimmer.

4.Structural features:

a.the puller is driven from inside,synchronizing to improving the machine speed

b.Slant wide puller,better to cross the joints.

5.With timing belt type back puller,it is suitable for thin and heavy duty fabric.(MPF/EPF).

6.lubricating system:spatter lubricating in machine base,auto lubricating of the upper shaft.


Copyright @ 2015百惠 客服电话:0576-88168056
浙ICP备15035833号-2   浙公网安备 33100202000697号